Showing guidance for Canada
Home / Guides / Basics

How to Calculate Watt Hours for Your Appliances

Updated October 28, 2026By the Prep For Outage Team3 min readSources linkedHow we choose

Advertiser disclosure: some links are affiliate links and we may earn a commission. It never changes our advice. Details

On this pageThe basic formulaStep 1: find each appliance's wattsStep 2: estimate hours of useStep 3: add it all upA worked exampleUsable capacity and inverter lossesCheck the surge as wellTurn the math into a planQuick answers

Learn how to calculate watt hours with a simple formula, a worked example, and tips on usable battery capacity and inverter losses.

Key takeaways
  • Watt-hours equal watts multiplied by hours.
  • You will get less than the printed capacity because of losses.
  • Add up essentials, multiply by days, and keep a margin.

Watt hours sound technical, but the idea is simple. A watt-hour is a unit of energy: one watt used for one hour. If you can multiply two numbers, you can work out what your appliances use and how long a battery will last. This guide walks through it step by step.

The basic formula

Energy in watt-hours equals power in watts multiplied by time in hours.

  • A 10 watt LED light on for 5 hours uses 50 watt-hours.
  • A 60 watt device on for 2 hours uses 120 watt-hours.

Battery capacity is also shown in watt-hours. A battery with 1,000 watt-hours could, in theory, supply 100 watts for 10 hours. In practice you get a bit less.

Step 1: find each appliance's watts

Look at the label on the appliance or its power adapter. You might see watts (W) directly. If you see only volts (V) and amps (A), multiply them: watts equals volts times amps. For example, 120 volts and 1 amp is 120 watts. Remember that labels often show the maximum draw, so real use may be lower. A plug-in watt meter can show actual use if you want to measure it.

How ready are you?Take the 14-question readiness quiz and see your biggest gaps in 2 minutes.
Take the quiz

Step 2: estimate hours of use

Be realistic about how long each item will run. Some things run continuously, such as a router. Others cycle, like a fridge compressor that is on for part of each hour. For cycling items, estimate the fraction of time it runs. If you do not know, a plug-in meter over a day will show the real number, or you can use a conservative guess.

Step 3: add it all up

Write a short table with each appliance, its watts, its hours per day, and the watt-hours. Then add up the column. That total is the daily energy you need.

A worked example

Here is a made-up round-number example for one evening.

  1. Router and modem: 20 watts for 6 hours is 120 watt-hours.
  2. Three LED lights: 30 watts total for 5 hours is 150 watt-hours.
  3. Laptop: 50 watts for 3 hours is 150 watt-hours.
  4. Phone charging: 10 watts for 2 hours is 20 watt-hours.

The total is 440 watt-hours. That is the energy used before accounting for losses.

Usable capacity and inverter losses

A battery's printed capacity is not all available to you. Power stations lose some energy when they convert the stored direct current to household alternating current. They also use a small amount to run their own electronics and display. Many units also hold back some capacity to protect the battery. The result is that you get noticeably less than the printed number.

The loss is not fixed. It depends on the unit and how heavily it is loaded, so we will not give a single number. As a rule of thumb, plan on a reduced figure and leave a margin. Using the DC and USB ports directly for phones and lights skips the inverter and wastes less. Cold weather can reduce usable capacity too. See portable power station in cold weather.

Heads up: Check the manufacturer's manual for how it states capacity and any reserve it keeps. If you need a hard number for something critical, like a medical device, test the runtime at home before you depend on it, and talk to your provider.

Check the surge as well

Watt-hours tell you how long a battery lasts. They do not tell you if it can start a motor. For that, you also need to check the output and surge ratings. See running watts vs starting watts.

Turn the math into a plan

  • Total your daily watt-hours for essentials.
  • Multiply by the number of days you want to cover.
  • Divide by the usable fraction of the battery to get the capacity needed.
  • Add a margin, and consider solar to recharge. See charging with solar panels.

The what size power station do I need guide and the outage planner do the sums with you, and the how many watts to run a house guide shows the typical whole-home picture. Compare models in the power station hub.

Quick answers

How do I convert amps to watts?

Multiply amps by volts. For example, 2 amps at 120 volts is 240 watts.

Why is my battery not lasting as long as the math says?

Inverter losses, standby use, cold temperatures and a protected reserve all reduce usable capacity.

Is a watt-hour the same as a watt?

No. A watt is a rate of power use, and a watt-hour is the energy used over an hour.

Sources (2)

Get the free 72-hour kit

A printable checklist, water planner and emergency contacts page. No signup.

Download the PDF Try the outage planner

Keep reading

Some links are affiliate links. We may earn a commission at no cost to you. How we make money. General information only, not professional advice.

Get the free 72-hour kit (PDF)